Home Forums General Interesting Websites Raptor Wire Rope Lubricator

Raptor Wire Rope Lubricator

Home Forums General Interesting Websites Raptor Wire Rope Lubricator

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #2820
    Rodney Fitzpatrick
    Participant

    Viper MkII High Pressure Wire Rope & Umbilical Lubricator Kit
    No more manual greasing
    – Less waste and mess
    – Penetrates to the wire rope core
    – Stops corrosion / protect ropes
    – Fast and efficient wire rope lubrication
    – Lubricates ropes from 8mm to 62mm sizes
    – Viper MkII Maxi lubricates ropes up to 165mm

    ViperMkII Wire Rope Lubrication – The Solution
    The manual lubrication of wire ropes via the drip, brush, spatula or rubber glove method has always been a difficult maintenance task. Typically messy asphaltic or “blackjack” type products were employed which had coating abilities but very little lubrication or penetration properties. Manual application can lead to environmental and safety issues as too much lubricant leads to dripping and wastage.

    The Viper MkII Wire Rope Lubricator provides fast and effective lubrication of wire ropes from 8mm to 62mm in diameter, at speeds up to 1000 metres per hour. It eliminates the slow and labour-intensive task of manual lubrication, at the same time achieving superior results by forcing quality lubricant under pressure right through to the wire rope core.

    Follow this link to view Raptor Video: http://www.raptor.lubeng.com.au“>http://www.raptor.lubeng.com.au

    Viper MkII System Description
    The system consists of the Lubricator Collar – which houses the polyurethane seals to suit the specific size rope. The assembly is clamped around the rope and anchored to a fixed point, and then the rope is pulled through the collar. Lubricant is applied utilizing a high pressure grease pump with lubricant forced between the strands to the centre of the rope. Scraper plates at each end of the collar remove dirt and old lubricant plus smooth broken wires before they can damage the seal.

    Viper MkII Applications
    The Raptor Wire Rope Lubricator has been used extensively in many applications including:

    wharf cranes
    oil well platforms
    ship cranes
    anchor ropes
    ROV cables
    deck winches
    mine winders
    overhead cranes
    mobile cranes
    shiploaders

    Viper MkII Wire Rope Lubricant
    Lubrication Engineer recommends the use of Viper MkII Wire Rope Lubricant for use with the Raptor lubricator. The Viper MkII NLGI#00 grade fluid grease with exceptional penetrating ability, it is tacky and water resistant and will penetrate wire ropes to the core providing wear and corrosion protection even in undersea applications. Viper MkII lubricant is compatible with all wire rope core materials including wire line wire ropes and plastic coated pulleys.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Comments are closed.

Skip to toolbar