Slingsby PCB’s

This topic has 12 replies, 5 voices, and was last updated 14 years, 8 months ago by DANFROV.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
April 15, 2010 at 7:45 am #3444

Mike Kernaghan
Participant

Folks,

I have acquired a load of Slingsby PCB’s, believed to be from Trojan vehicles, and I am trying to find out whether any of them are compatible with other Slingsby ROV’s such as the MRV’s, Spartans, etc.

I’ll touch base with the guys at Kirbymoorside to see if they can shed any light on it for me but thought that there might be some experienced Slingsby operators out there that might know?

Cheers,
Mike

April 15, 2010 at 8:59 am #27392

rovnumpty
Participant

Mike

Speak to sonsub. They’ve got a load of scrap masquerading as slingsby’s finest. Think some of the old Trojan stuff can be used on the MRVs.

Ray Shields may be able to point you in the right direction.

These weren’t ‘aquired’ from greenwell road were they?

April 15, 2010 at 9:54 am #27393

Mike Kernaghan
Participant

Cheers Numpty,

No, not from Greenwell Road! I was half expecting someone to ask that question though.

‘Acquired’ probably wasn’t the correct word to use as we have bought these and have the paperwork to show that.

Later,
Mike

April 17, 2010 at 7:46 pm #27394

Ray Shields
Participant

Have you perchance bought these from Fugro who may or may not have sold off old ones from upgraded Spartans or MRV5 which has now been sent to the graveyard known as Singapore.

Are they A040-300 series boards (300, 301, 305, 308 etc)?

If you have any Singlge Board Computers (SBC) or Graphics cards you will find buyers for them as they have not existed for years but MRVs at least still use them.

April 26, 2010 at 4:53 pm #27395

Mike Kernaghan
Participant

Hi Ray,

Not from Fugro either. I have been in contact with Perry and they believe that some of them are actually XL PCB’s.

I’m in the process of putting a list together so once I have that it will hopefully be easier to find out exactly what vehicles they are from and also whether they are still used.

Cheers,
Mike

April 26, 2010 at 10:05 pm #27396

Ray Shields
Participant

Let us know when you get a list of the numbers and Ill let you know if I recognise any.

April 27, 2010 at 9:22 am #27397

DANFROV
Keymaster

Dear Mike,

Here is a short list of MRV PCB’s

Dan

PRINTED CIRCUIT BOARDS

353-04-1131 SELMEC I/O PCB
303D-01-1030 SELMEC ALARM PCB

040-03-300B/01 ANALOGUE I/O PCB
040-03-304C/01 HYDRAULIC DRIVE PCB
040-03-305A/01 VIDEO DRIVER PCB
040-03-306B/01 LIGHTS CONTROL PCB
040-03-308C/06 SERVO DRIVE PCB
040-03-310A/03 GYRO INTERFACE PCB
040-354-003 MULTI INTERFACE PCB
A040-410-004 WATERMAN VALVE GFVP PCB ASSY
A040-452-004 POWER SUPPLY PCB ASSY
A040-448-004 VIDEO CONTROL PCB ASSY
A040-447-004 HEADING PCB ASSY
A040-446-004 ALARMS PCB ASSY
A040-445-004 SENSORS PCB ASSY
A040-444-004 SERVO DRIVE PCB ASSY
A040-443-004 SOLENOID PCB ASSY
A040-442-004 SIGNAL RELAY PCB ASSY
A074-001-101 SEL PV EXT RACK MRV10
A040-441-004 POWER RELAY PCB ASSY
A040-411-002 WATER ALARM PCB

040-04-250A/01 WATER ALARM PCB
040-01-302/01 TRANSDUCER INTERFACE PCB
040-330B/01 GENERAL PURPOSE RELAY PCB
040-301-01 MULTIPLE LATCHING PCB
040-341-004 TMS GFVP PCB
A040-360-005/1 SELBUS 360 SERIAL INTERFACE PCB
A040-254-001 TVP PCB
RS 501-272 96 WAY EXTENDER BOARD
040-03-314A/01 ALARM EXTENTION PCB(NOT ON TAG)
307B .+/-15 V POWER DISTRIBUTION PCB(NOT ON TAG)
040-04-250A/01 WATER DETECTOR PCB(NOT ON TAG)
029-51-003 LIGHTS DIMMER MODULE
SWITCHING PCB 307 FOR TMS
A040-425-004 SURFACE UNIT PANEL INTERFACE PCB CPCI-7248
A040-440-015 AMPRO PC104 CORE MODULE ASSY
A040-444-104 SERVO DRIVE PCB ASSY
A040-453-004 LIGHT DIMMER PCB
1426-001 DIGIQUARTZ INTERFACE PCB EXPLOROCEAN
A040-445-015 SENSORS DIGIQUARTZ INSTALLATION PARTS LIST
040-50-002 MAGNETOMETER FLUXGATE SENSOR & pcb hr3m-a
009-50-027 400 HZ INVERTER
PCI 7248 PCB
3534 PCB
A110-316-003 Compact PCI single board computer
Radiatron 173-583 Compact PCI 4 slot backplane, order requesting mains inserts be fitted to M connector.
040-00-020 CPCI-3534 COMPACT PCI 4 CHANNEL SERIAL IO MODULE

April 27, 2010 at 10:38 am #27398

Mike Kernaghan
Participant

Will do Ray.

Cheers Dan, I hope that was a copy and paste job!

Regards,
Mike

April 27, 2010 at 3:22 pm #27399

James McLauchlan
Participant

Will do Ray.

Cheers Dan, I hope that was a copy and paste job!

Regards,
Mike

Nah… I bet Dan can do that from memory 😉

April 27, 2010 at 6:27 pm #27400

Ray Shields
Participant

It was an MRV10 cut n paste 🙂

Because it has PCBs included that are not in earlier MRVs. 300 series boards are all SELMEC, later vehicles (and Super Spartans) started using 400 series and used SELNET.

April 28, 2010 at 8:30 am #27401

DANFROV
Keymaster

Ray,

Here is the next MRV list, what Vehicle?

——————————————————–

040-03-300B/01 ANALOGUE I/O PCB
040-03-304C/01 HYDRAULIC DRIVE PCB
040-03-305A/01 VIDEO DRIVER PCB
040-03-306B/01 LIGHTS CONTROL PCB
040-03-308C/06 SERVO DRIVE PCB ( 1 chip missing)
040-03-310A/03 GYRO INTERFACE PCB
040-01-302/01 TRANSDUCER INTERFACE PCB
A040-227-004 GFVP PCB
029-51-003 LIGHTS DIMMER MODULE
040-03-151A/01 Terminal Connector PCB
2768T-SCST Single Mode FM Video TX Unit (1300 nm)
2768R-BFST Single Mode FM Video RX Unit (1300 nm)
040-03-330 GENERAL PURPOSE RELAY CARD
040-03-354 SELMEC LINE DRIVER
040-03-353 GENERAL PURPOSE CARD
040-03-360 SELMEC TO SERIAL; INTERFACE
040-03-303 ALARMS
501-272 96 – WAY EXT. CARD
043-00-010 MEMORY PCB
0330-1039B GREENSPRING SURFACE PCB
OED 202 HERSHMAN RX
OED 203 HERSHMAN TX
040-04-333A/1 VALVE PACK PCB
040-0254-004 8 FUNCTION THRUSTER VALVE PACK PCB
A040=63-151A JB 2 PCB

——————————-

Dan

April 28, 2010 at 1:19 pm #27402

Ray Shields
Participant

OED 202 HERSHMAN RX
OED 203 HERSHMAN TX

I thought it was an OSD202 and OED202 for TX and RX, and that was the original 850nm fibre comms for vehicle. Most people have changed theirst to run on single mode with several data channels and video to match 🙂

I have a bigger list somewhere!

The Greenspring SBC (Single Board Computer) are worth a good bit as they no longer exist and the standard MRV uses 2, without it it just doesnt work.

April 28, 2010 at 1:28 pm #27403

DANFROV
Keymaster

I am just copying an exsisting OLD inventory.

I thought it would be helpful for Mike to see a list of numbers rather than have to send a list for review.

Dan
Author

Posts