Home Forums ROV ROV Technical Discussions Neptune Leak detection

Neptune Leak detection

Home Forums ROV ROV Technical Discussions Neptune Leak detection

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #4658
    Emanuele
    Participant

    I’ve been handed over a Neptune 5100L leak detection which is kind-of-broken…
    The short range unit is ok, the long reange unit in a very bad shape.
    I’m looking for drawings/techs/schematics/wiring diagram on how to disassemble completely and try to fix the stuff.

    Any help appreciated (we are in downtime…)

    Thanks!

    EB

    #31692
    Savante
    Participant

    Can’t you get a hold of Chris at Neptune?

    #31693
    Savante
    Participant

    can you post up some pictures?

    word of warning, if there are any yellow triangles or warning stickers on the system – then you need to obey them. I’ve not used the Neptune system, but I do operate high power leds for fluorescence work and some of them carry laser warning safety labels for a good reason and require eye protection.

    #31694
    Emanuele
    Participant

    Savante,
    can you pass contact details?

    EB

    #31695
    Savante
    Participant

    http://www.neptuneoceanographics.com/

    have at it.

    the chaps name is chris teal. pass on my regards !!

    Neptune Oceanographic Limited
    Sapharey House
    Sturt Road
    Charlbury, Oxon
    OX7 3SX

    Tel: +44 (0) 8453 707 177
    Fax: +44 (0) 08704 581 979

    email: info@neptune.gb.com

    middle east number is +971 6 5130 333

    #31696
    Emanuele
    Participant

    Cheers Savante.
    I called but nobody available…i tend to forget that this kind of shit happens on the vere of the w.e.

    I’ll try later, maybe calling the middle-est office.

    EB

    #31697
    Daniel
    Participant

    I’ve been handed over a Neptune 5100L leak detection which is kind-of-broken…
    The short range unit is ok, the long reange unit in a very bad shape.
    I’m looking for drawings/techs/schematics/wiring diagram on how to disassemble completely and try to fix the stuff.

    Any help appreciated (we are in downtime…)

    Thanks!

    EB

    Have you managed to fix this?

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Comments are closed.

Skip to toolbar